Flextra Work Light HDV Pro 30W

1 405 kr ink. moms

Wide beam pattern
1900 lm
E-approved and EMC ECE-R10

Slut i lager

FLEXTRA WORK LIGHT HDV PRO 30W

Work light LED with aluminum housing and polycarbonate lens. Deutsch connector directly in the lamp. Front piece in solid-colored plastic that extends the life of the paint. Mount in stainless steel designed so that the lamp can be adjusted both in height and depth. The lamp can be mounted both standing and hanging in its mount.

Technical data:

Light pattern: Flood
Height incl. mount 139 mm
Connection: Built-in connector DT04-2P. The lamp is delivered with 1 m connection cable.
Additional information: E-approved EMC ECE-R10. EN 55015.

Through PWM technology (Pulse Width Modulation), the LED diodes are turned on and off at a frequency so high that the eye cannot register any flicker. This technology is used both to drive the diodes harder with lower heat development and to function as a power-regulating electronic protection when the lamp risks becoming too hot. This enhances the lamp’s performance and extends its lifespan. Protection against incorrect connection and overvoltage.

Ytterligare information

Artikelnummer	101131
Actual Lumens	1,900 lm
IP rating	IP68
Lumen measured	2700
Voltage	9-36 V
Voltage min	9
Voltage max	36
Operating Temperature	-40°C to +60°C
Temperature max	60
Temperature min	-40
Lamp type	LED
WxHxD	100x100x75 mm
Total Diodes	10
Power Consumption	27 W
Diod brand	Osram
Brand	Flextra

Recensioner

Det finns inga recensioner än.

Bli först med att recensera ”Flextra Work Light HDV Pro 30W”